SHIMPO TRC-Series - Manual (Page 21)

17
9 DigiTorq_TRC
When you connect the TRC to a PC with the USB cable, your PC is able to obtain test data from the TRC.
Installation of the DigiTorq_TRC application software is required.
9.1 Feature of DigiTorq_TRC
DigiTorq_TRC is an add-in software for MS Excel ®*
The measurement data and the memory data of the unit can be directly sent to an
Excel spreadsheet where graphing and data analysis is easy.
*Excel is a registered trademark of Microsoft Corp.
9.2 Download DigiTorq_TRC
The DigiTorq_TRC is available for free at the following web address:
http://www/shimpoinst.com/software.php
The manual is included with the software download, and is available separately.
9.3 Battery Life and USB
Leaving the USB cable connected to the TRC will drain battery power at a faster rate. Only connect the
TRC USB cable when communicating or use the AC adapter/charger.
10 Support
10.1 Repair and Calibration
Please contact your Shimpo dealer for information regarding the repair and calibration of your TRC.
10.2 Warranty
Nidec-Shimpo Corp. warrants, to the original purchaser of new products only, that this product shall be
free from defects on workmanship and materials under normal use and proper maintenance for one
year from the date of original purchase. See warranty card.