SHIMPO TRC-Series - Manual (Page 20)

16
8.3 Clearing Stored Data (Latest Memory Data)
When the latest memory data is displayed, press and hold the Zero key until “Clr” is shown in the display.
In case of latest memory number = 001:
8.4 Clearing Stored Data (Each Pattern No.)
When the pattern No. is displayed, press and hold the Memo key and the Zero key until “Clr” is shown in
display.
8.5 Clearing Stored Data (All Memory Data)
Power off. Press and hold the Memo key and power on. Continue to hold the Memo key until “All Clr” is
shown in the display.
Zero
New latest memory data
Clear display
Indicating about 1 sec
299 300
Latest memory data indicates
Press and hold until clear display
Zero
Indicating about 1 sec
Return to
Test mode
Indicating No data
001
Memory No. =001
Clear display
Indicating about 1 sec
-1-
Indicating target
pattern No.
Memo
Zero
+
-1-
Clear display
Indicating about 1 sec
Return to test mode
-1-
Memo
POWER
+
Power off ALL
Clear display
Indicating about 1 sec
Return to test mode
-1-