SHIMPO TRC-Series - Manual (Page 12)

8
4.2 Comparator settings for High/Low Limits
4.2.1 Pattern No. Setting
The TRC can store up to 10 patterns of High/Low torque limits.
This section describes how to set the pattern No.
The pattern No. is from 0 to 9.
When a torque unit of measure is displayed, the Comparator function may be disabled.
Pattern No.
4.1.7
The ID No. can be individually applied. (Current setting is displayed first.)
Current unit No. MSD(Most Significant Digit)blinking
LSD(Last Significant Digit) blinking
Press Mode to increment, return to 0 when 9
Press Recall to go to MSD setting
Press Mode to increment, return to 0 when 9
Mode
Mode
Save and exit
Memo
Hi/Lo
F05 F05
F05
Recall
Recall
F03
Go to Auto Reset Setting
Disabled comparator
lbI
Hi/Lo
-1- Hi/Lo -2-
Hi/Lo
-9-
Hi/Lo
-0-
Hi/Lo