Martel Electronics DMC1400 - Manual (Page 87)

8.8 Clearing Test Results
At the main menu, press the MENU function key, followed by the
MORE function key, followed by the DOCUMENT function key to
display the first level document mode menu.
Press the REVIEW function key to display the review selection menu.
Press the CLEAR function key to display the tag selection prompt
and clear menu options.
To erase all tags from the calibrator memory, press the CLEAR ALL
function key. Additional prompts are displayed to confirm the
request. Press the YES function key in response to every prompt to
proceed with clearing all tags. To abort the clear request, press the
NO function key in response to any prompt.
To erase a single tag from the calibrator memory, highlight the
desired tag as described under viewing test results. Press the
SELECT function key to erase the tag. An additional prompt is
displayed to confirm the request. Press the YES function key to erase
the tag, or the NO function key to abort the request. To erase
additional tags, highlight each in turn and press the SELECT function
key. When all tags have been erased, press the EXIT function key to
return to the review selection menu.
8.9 Setting the Date and Time
At the main menu, press the MENU function key, followed by the
MORE function key, followed by the NEXT function multiple times to
get to the clock selection menu.
Press the CLOCK function key to display the clock data entry screen.
85