Standard equipment – Martel Electronics MasterCAL User Manual
Page 12
MasterCAL
Users Manual
2
The ability to automatically log up to 8,000 data
points.
A serial computer interface for
uploading/downloading tasks, lists, and results.
Automatic calibration procedures for
transmitters and limit switches using split screen
MEASURE/SOURCE mode.
Transmitter mode in which the calibrator can be
configured to emulate the functions of a process
instrument.
Built-in calculator with square-root function, and
accessible registers containing measure and
source values.
An optional bar code wand for entering
alphanumeric characters.
•
Measuring features:
Damping (smoothing of the last several
readings), with display indicator of damped
status.
Display of measurements in engineering units,
percent of scale, square-law inputs, or custom
units.
The ability to capture and display minimum and
maximum measured levels.
•
Sourcing features:
The ability to set source values to engineering
units, percent of scale, square-law outputs, or
custom units.
Manual and automatic stepping, and an output
ramp feature for testing limit switches. Trip
detect is either a 1 V change or a continuity
status change (Open or Short) from one ramp
increment to the next.
For performance testing and calibration instructions
contact Beta.
To contact Beta, call:
USA and Canada:
1-800-537-2181
972-241-2200
Or visit us on the World Wide Web:
Standard Equipment
The items listed below and shown in Figure 1 are
included with your calibrator. If the calibrator is