KROHNE BATCHCONTROL 5014 C - Manual (Page 5)

Installation and operating instructions 5 BATCHCONTROL
Functional description
BATCHCONTROL IFM 5014C
The volume to be filled into the container is measured “in line“ by means of the electromagnetic
flowmetering system. The BATCHCONTROL closes the filling valve once the preset filling volume
has been reached. It is always the preset target volume that is filled into the container.
The signal converter converts the measured flowrate signal into volume that are transfered to the
integrated batch controller.
The influence of valve closing times and other dynamic factors can be corrected by the adaptive
correction formalism of the BATCHCONTROL 5014C.
The use of state-of-the-art microprocessor electronics and the high-speed analog/digital converter
also enables changes in the flowrate to be sensed precisely. This technology ensures high
reproducibility and long-term stability.