KROHNE IFC 010 Converter HART - Manual (Page 5)

HARTÆ Communications Protocol
IFC010 Command Specification Rev: 1.0 Release Date: 29 May 1997
© 1997 KROHNE Mefltechnik D-47058 Duisburg Page 5
1. Referenced Documents
HART Physical Layer Specification - Revision 7.0 D8900097
HART Data Link Layer Specification - Revision 7.0 D8900098
HART Command Summary Information - Revision 7.0 D9000048
HART Universal Command Specification - Revision 5.1 D8900038
HART Common-Practice Command Specification - Revision 7.0 D9000050
HART Common Tables - Revision 5.0 D9000051
2. Expanded Device Type Code
Manufacturer Identification Code = 69 (0x45)
Manufacturer¥s Device Type Code = 246 (0xF6)
The merger of these two 8-bit codes forms the 16-bit Expanded Device Type Code.
Expanded Device Type Code = 17910
3. IFC010 Conformance And Command Class Summary
Command Description
Number
CONFORMANCE CLASS #1
- UNIVERSAL
0 Read Unique Identifier
1 Read Primary Variable
CONFORMANCE CLASS #1A
- UNIVERSAL
0 Read Unique Identifier
2 Read Primary Variable Current and Percent of Range
CONFORMANCE CLASS #2
- UNIVERSAL
11 Read Unique Identifier Associated with Tag
12 Read Message
13 Read Tag, Descriptor, Date
14 Read Primary Variable Sensor Information
15 Read Primary Variable Output Information
16 Read Final Assembly Number
CONFORMANCE CLASS #3
- UNIVERSAL
3 Read Dynamic Variables and P.V. Current
- COMMON-PRACTICE
33 Read Transmitter Variables
48 Read Additional Transmitter Status
50 Read Dynamic Variable Assignments
60 Read Analog Output and Percent of Range
62 Read Analog Outputs
- TRANSMITTER-SPECIFIC
128 Read Hardware Information
129 Read Device Implementation Code
130 Read Meter Diameter