KROHNE IFC 010 Converter HART - Manual (Page 2)

HARTÆ Communications Protocol
IFC010 Command Specification Rev: 1.0 Release Date: 29 May 1997
© 1997 KROHNE Mefltechnik D-47058 Duisburg Page 2
CONTENTS
CONTENTS 2
1. REFERENCED DOCUMENTS 5
2. EXPANDED DEVICE TYPE CODE 5
3. IFC010 CONFORMANCE AND COMMAND CLASS SUMMARY 5
4. ADDITIONAL RESPONSE CODE INFORMATION 6
4.1 Transmitter-Specific Command Error 6
4.2 Update Failure 7
4.3 Field Device Malfunction 7
4.4 Configuration Changed 7
4.5 Primary Variable Analog Output Fixed 7
4.6 Non-Primary Variable Out Of Limits 7
4.7 Primary Variable Out Of Limits 7
5. GENERAL TRANSMITTER INFORMATION 7
5.1 Inputs/Outputs And Dynamic/Transmitter Variables 7
5.2 Damping Implementation 8
5.3 Nonvolatile Memory Data Storage 8
5.4 Multidrop Mode 8
5.5 Burst Mode 8
6. ADDITIONAL UNIVERSAL COMMAND SPECIFICATIONS 8
6.1 Command #0 Read Unique Identifier 8
6.2 Command #14 Read Primary Variable Sensor Information 8
6.3 Command #15 Read Primary Variable Output Information 8
7. ADDITIONAL COMMON-PRACTICE COMMAND SPECIFICATIONS 9
7.1 Command #33 Read Transmitter Variables 9
7.2 Command #34 Write Primary Variable Damping Value 9
7.3 Command #35 Write Primary Variable Range Values 9