KROHNE UFM 500 EN - Manual (Page 15)

15
Changing the numbers.
4.2.4 Example for setting the signal converter
Display
Keys
1 st line 2 nd line
Explanation
↑
6.0000 E 1 PuLSe/min
↑
3.6000 E 3 PuLSe/hr
→
3.6000 E 3 PuLSe/hr
8 x
↑
1.6000 E 3 PuLSe/hr
→
1.6000 E 3 PuLSe/hr
4 x
↑
1.0000 E 3 PuLSe/hr
Change pulse rate
(Continuation)
↵
Fct. 3.4.3 PULSRATE
↵
Fct. 3.4 FREQ.OUTP.F
↵
Fct. 3.0 INSTALL.
↵
STORE YES
Return to measuring
mode
↵
PARAM.CHEC
K If fct. 4.0 PARAM.ERR.
should appear:
plausibility error, see
sect. 4.3
- - - - - - - - - - - - - - / - - - Measuring mode
Display
Keys
1 st line 2 nd line
Explanation
- - - - - - - - - - - -/ - - Measuring mode
→
Fct. 1.0 OPERATION When ENTRY CODE 1
“YES” is set in fct. 3.6.2
the 9 key-stroke “CodE 1”
must be typed in.
Factory setting
→ → → ↑ ↑ ↑ ↵ ↵ ↵
Main menu operation
2 x
↑
Fct. 3.0 INSTALL. Main menu setting
→
Fct. 3.1 BASIS
PARAM Submenu Frequency output
3 x
↑
Fct. 3.4 FREQ.OUTP.
F
→
Fct. 3.4.1 FUNCTION F
2 x
↑
Fct. 3.4.3 PULSRATE Change pulse rate
→
1.0000 E PuLSe/Sec
Changing the texts (units).
When the units are changed, the totalizer value is automatically converted.
1 3 . 5 7 1
m
3
/ h r
9 7 . 3 5
m
3
/ h r
9 7 . 3 5
m
3
/ h r
Moving the cursor (blinking part) to the
i ht
9 7 3 5 0
L i t e r / h r
1 3 . 5 7 1
m
3
/ h r
Changing from text (unit) to totalizer setting.
Changing from totalizer setting back to text.
1 0 . 3
S e c
9 7 . 4 5
m
3
/ h r
9 7 . 3 5
m
3
/ h r
7 . 1 4 3 7
U S . G a l / S e c
1 3 . 5 7 1
m
3
/ h r
1 3 . 5 7 1
m
3
/ h r
Fc t . 1 . 3 . 1
T I M E C O N S T . I
↑
→
↑
→
→
↵
Return to display of functions.
The following example shows how to change the pulse rate of the frequency output (function: fct. 3.4.3 PULSRATE, see
sect. 4.3). The cursor (flashing part of display) is shown here in “bold” type.
- “old” setting:
1 pulse per second (1.000 E 0 PuLSe/Sec)
- change to: 1000 pulses per hour (1.000 E 3 PuLSe/hr)