KROHNE OPTISENS COND 1200 EN - Manual (Page 37)

TECHNICAL DATA
6
37
OPTISENS COND 1200
www.krohne.com 01/2014 - 4001967301 - MA OPTISENS COND 1200 R01 en
6.2 Technical data
Measuring system Measuring system Measuring system Measuring system
Measuring principle Conductive conductivity
Measuring range OPTISENS COND 1200 (W)
0.1...200 µS/cm (c=0.05)
1...2000 µS/cm (c=0.2)
1...20 mS/cm (c=1)
OPTISENS COND 1200 (PW)
0.05...10 µS/cm (c=0.01)
0.001...1 mS/cm (c=0.1)
OPTISENS COND 1200 (GF)
10 µS/cm...15 mS/cm (c=1)
Materials
Construction OPTISENS COND 1200 (W):
Body: PVDF
Cell: Stainless steel (1.4571)
OPTISENS COND 1200 (PW):
Body: PVDF
Cell: Stainless steel (1.4571) or titanium
OPTISENS COND 1200 (GF):
Body: PVDF
Cell: Graphite (GF)
Sensor options With integrated Pt100 temperature sensor
Process connection OPTISENS COND 1200 (W):
G3/4 A male thread
G1/2 A male thread for immersion assembly
OPTISENS COND 1200 (PW/GF):
G3/4 A male thread
G1/2 A male thread
G1 A male thread
3/4-14 NPT male thread
Measuring accuracy
Conductivity accuracy OPTISENS COND 1200 (W): +/- 2% full scale 1
OPTISENS COND 1200 (PW): +/-10% from the nominal value 1
OPTISENS COND 1200 (GF): +/-10% from the nominal value 1
Operating conditions
Temperature range OPTISENS COND 1200 (W/PW):
0...+135°C / +32...+275°F
OPTISENS COND 1200 (GF):
0...+130°C / +32...+266°F
Max. operating pressure OPTISENS COND 1200 (W/PW):
16 bar at +25°C, 9 bar at +60°C / 232 psi at +77°F, 130.5 psi at +140°F
OPTISENS COND 1200 (GF):
16 bar at +25°C, 9 bar at +60°C / 232 psi at +77°F, 130.5 psi at +140°F
1 Depending on the production conditions, the cell constant can deviate from the nominal value. This deviation can be
compensated at the signal converter.
.book Page 37 Friday, January 24, 2014 12:32 PM