KROHNE OPTISENS COND 1200 EN - Manual (Page 31)

OPERATION
4
31
OPTISENS COND 1200
www.krohne.com 01/2014 - 4001967301 - MA OPTISENS COND 1200 R01 en
After starting-up the signal converter, the measuring screen appears. This is the standard
screen which is displayed automatically in the normal operating mode. If you are in this mode
and you want to initiate a calibration, you have to activate the manual hold function performing
the following steps.
Step 1: activating the hold function
• You have activated the hold function. To go to the next step and prepare the calibration
procedure. You have to return to the measuring mode.
• Press ^ until you reach the measuring mode again
Step 2: preparing the calibration procedure
• If you calibrate a new sensor, make sure that the sensor is correctly connected to the signal
converter.
• Check the sensor for damages or dirt deposits.
• Provide a suitable standard solution. Further information on page 8
After activating the hold function and the preparative measures, you can get access to the
calibration procedure from the measuring mode via the main menu setup
setup setup setup (step 3a).
• Press >>>> for more than 2.5 seconds, then release the button. You are on the main menu level. In the
upper line of the display "A" appears, beneath the main menu quick setup
quick setup quick setup quick setup is highlighted.
• Press or until the main menu quick setup quick setup quick setup quick setup is highlighted.
MAIN MENU
> A quick setup > A quick setup > A quick setup > A quick setup
B test
C setup
D service
• Press > >>> to enter the chosen menu.
You are on the first submenu level. In the upper line of the display "quick setup" and
A1" appears, beneath the submenu language language language language is highlighted.
• Press or until the submenu hold function hold function hold function hold function is highlighted.
• Press > >>> to enter the chosen menu.
You are on the second submenu level. In the upper line of the display
"manual hold" appears, beneath the option off off off off is highlighted
• Press or to choose the option on
• Press ^ to confirm the entered value.
.book Page 31 Friday, January 24, 2014 12:32 PM