KROHNE UFM 610P EN - Manual (Page 6)

6
SWITCH ON…
CHECK BATTERY LEVEL IF THE BATTERY SYMBOL IS
FULL, THE UNIT IS CHARGED
PRESS ENTER
(See 2.4)
QUICK START PRESS ENTER
(See 3.2)
DIMENSION UNITS SELECT UNITS REQUIRED PRESS ENTER
(See 3.2)
OUTSIDE DIAMETER ENTER DATA PRESS ENTER
(See 3.2)
PIPE WALL THICKNESS ENTER DATA PRESS ENTER
(See 3.2)
PIPE LINING THICKNESS ENTER DATA NO LINING PRESS ENTER
(See 3.2)
PIPE WALL MATERIAL SELECT USING SCROLL KEYS PRESS ENTER
(See 3.2)
PIPE LINING MATERIAL
THIS WILL ONLY BE DISPLAYED
IF A THICKNESS HAS BEEN
ENTERED. SELECT USING
SCROLL KEYS
PRESS ENTER
(See 3.2)
FLUID TYPE SELECT USING SCROLL KEY PRESS ENTER
(See 3.2)