KROHNE UFM 610P EN - Manual (Page 16)

16
3. PROGRAMMING/MAIN MENU
Switch on... KROHNE
Press 0 for English
Press 1 for French
Press 2 for German
Press 3 for Spanish
Serial 0000 v 2.00
3.1 Main menu
Press SCROLL up or down to move cursor to required option, then
press ENTER to select. MAIN MENU yy-mm-dd hh:mm:ss
Quick start
View/Edit Site Data
Select sensor set
Data Logger
Set up RS232
Set up UFM 610 P
Read flow
3.2 Quick start
Selecting quick start offers the user the easiest option to achieve flow measurement. If the instrument has been used previously,
it stores the last QUICK START application data, which can accessed via the MAIN MENU option Read flow. This allows
the user to measure the same application without spending time entering new data.
If QUICK START is selected, proceed with the following routine.
Use the scroll keys to select, then press ENTER. QUICK START yy-mm-dd hh:mm:ss
Select the dimension units:
Millimetres
Inches
The instrument now asks for the Pipe outside diameter?
After entering the outside diameter press ENTER. QUICK START yy-mm-dd hh:mm:ss
Dimension units MILLIMETRES
Pipe outside diameter? 58.0