KROHNE UFM 610P EN - Manual (Page 45)

45
5.4.2 Wall thickness out of range
The wall thickness that has been entered is out of range of the instrument.
5.4.3 No data exists for this sensor
A sensor has been selected that is not available for use.
5.4.4 Lining thickness out of range
The pipe lining thickness has been incorrectly entered.
5.4.5 Site range is 1-20
There are only 20 storage sites available with 0 being the QUICK START site.
5.4.6 Cannot read flow because
•
CANNOT READ FLOW BECAUSE
•
CANNOT READ FLOW BECAUSE
Pipe dimensions are invalid Pipe is too small for sensor set
•
CANNOT READ FLOW BECAUSE
•
CANNOT READ FLOW BECAUSE
Materials are invalid Sensor mode is invalid for this pipe size
•
CANNOT READ FLOW BECAUSE
Pipe is too large for sensor set
5.4.7 Temperature range -20
°
C to +200
°
C
The temperature range of the transducers is –20
°
C to +200
°
C.
5.4.8 Logging has started
This will only appear if the instrument has been supplied with a logger.