Figure b-23. system:error? query, Figure b-24. system:language command, B-23 sys – KEPCO BIT 232F User Manual
Page 51: B-24 sys, Syst:err, Syst:lang
BIT 232 022800
B-13/B-14
FIGURE B-23. SYSTem:ERRor? QUERY
FIGURE B-24. SYSTem:LANGuage COMMAND
Syntax:
Short Form:
SYST:ERR?
Long Form:
SYSTem:ERRor?
Function:
Provides error messages to controller.
Description:
Returns error number and character string containing error message. Error messages are defined as
follows:
Example:
SYST:ERR?
Controller reads: 0, “No error”
ERROR MESSAGES
ERROR MESSAGE
EXPLANATION
0 “No error”
No error
-100 “Command error”
Wrong syntax; command not understood.
-222 “Voltage out of range”
Value Exceeds Power Supply Rating
-222 “Current out of range”
Value exceeds power supply rating
-240 “Hardware error”
Power supply did not respond to command
SYST:ERR?
Syntax:
Short Form:
SYST:LANG CIIL
Long Form:
SYSTem:LANGuage
Function:
Selects the CIIL language command set (See Appendix C.)
Description:
This command allows the CIIL command language to be used to program the power supply. (CIIL is
included to provide compatibility with earlier Kepco equipment.) Once CIIL is selected, the CIIL com-
mand ‘GAL’ followed by the command ‘SCPI’ must be sent for the power supply to respond to SCPI
commands.
Example:
SYST:LANG CIIL
Power supply responds to CIIL command set.
SYST:LANG