Appendix a - scpi common command/query definitions, Table a-1. scpi common command/query index, Figure a-1. *cls — clear status command – KEPCO BIT 232F User Manual
Page 31
BIT 232 022800
A-1
APPENDIX A - SCPI COMMON COMMAND/QUERY DEFINITIONS
A.1
INTRODUCTION
This appendix defines the SCPI common commands and queries used with the BIT 232/BIT
232-F Interface Card. Common commands and queries are preceded by an asterisk (*) and are
defined and explained in Figures A-1 through A-14, arranged in alphabetical order. Table A-1
provides a quick reference of all SCPI common commands and queries used in the BIT Card.
FIGURE A-1. *CLS — CLEAR STATUS COMMAND
TABLE A-1. SCPI COMMON COMMAND/QUERY INDEX
COMMAND
PAGE
COMMAND
PAGE
*CLS
A-1
*RST
A-5
*ESE
A-2
*SRE
A-6
*ESE?
A-2
*SRE?
A-6
*ESR?
A-3
*STB?
A-7
*IDN?
A-3
*TRG
A-7
*OPC
A-4
*TST
A-8
*OPC?
A-4
*WAI
A-8
Syntax:
*CLS
Function:
Clear status data
Response:
Not Applicable
Description:
Forces power supply to “operation complete idle” and “operation complete query” state. Clears all
Event Registers summarized in Status Byte Register.
Clears Standard Event Status, Operation Status Event, Questionable Status Event, and Status Byte
Registers. Clears the error queue.
Example:
*CLS
Power supply clears status data.
*CLS