HT instruments FULLTEST3 User Manual

Page 90

FULLTEST

EN - 89

14.2.

GENERAL SPECIFICATION

POWER SUPPLY

Mains voltage:

207

 253 V / 50/60 Hz ± 5%

Current consumption:

16 Amax

MECHANICAL SPECIFICATIONS

Dimensions (L x W x H):

400 x 300 x 170 mm

Weight: 15

MEMORY AND INPUT/OUTPUT INTERFACES

Internal memory:

999 locations (three-level memory structure)

PC interface:

USB 2.0 device, connector type “B”

USB keyboard, USB printer, pen drive,
USB barcode reader:

2 x USB 2.0 host, connector type “A”

Pen drive requirements:

FAT12, FAT16 or FAT32 with a sector size of 512 Byte

Warning lamp:

For dielectric test

Keyboard for remote controls
START/STOP/SAVE keys:

Yes

Bluetooth interface connection
to mobile devices:

Yes

ENVIRONMENTAL CONDITIONS

Reference temperature:

23°C ± 5°C

Working temperature:

0°

 40°C

Reference humidity:

< 60% RH w/o condensation

Working humidity:

< 80% RH w/o condensation

Storage temperature:

-10

 60°C

Storage humidity:

< 80% RH w/o condensation

REFERENCE GUIDELINES

Safety tests machines/
switchboards/devices: IEC/EN60204-1:2006; IEC/EN61439-1; IEC/EN60335-1

Literature: IEC/EN61187
Instrument: IEC/EN61557-1-2-3-4-6-13-14

GENERAL CHARACTERISTICS

Display:

4.3 inch colour TFT LCD with touch screen,

Limit value setting:

See each function separately

Warning in case of exceeded
Limit values:

Optic and acoustic warning in case of exceeded value

Instrument safety:

IEC/EN61010-1

Insulation:

Protection class I (protection conductor)

Pollution degree:

Measurement category:

CAT II 300V (Power), CAT III 300V (other tests)

Altitude above sea level:

2000 m

Mechanical protection:

IP40

14.3.

ACCESSORIES

Please see enclosed packing list.