HT instruments FULLTEST3 - Manual (Page 75)

FULLTEST 3
EN - 74
9. RECALL RESULTS
In order to recall saved measurement result, follow the next steps:
1) Press the RCL hard key, the following screen will appear.
Figure 66 : RECALL menu
2) Check offered customer and if needed, select another one by pressing the CUSTOMER touch-
screen key first. The following screen will appear.
Figure 67 : RECALL - SELECT CUSTOMER menu
- Check the list of available customers by using the ▼ and ▲ touch-screen keys (if there are
more than 4 customers entered).
- Mark appropriate customer by pressing the customer touch-screen key, e.g. CUSTOMER 3.
- Confirm the selection by pressing the ENTER touch-screen key, screen will turn to RECALL
menu.
Note! If there is a list of many available customers use the SEARCH touch-screen key to select
appropriate one quickly.
3) Select wished measurement by using the ◄ and ► keys.
4) Press the RCL hard key again, saved result will be displayed as follows.