HT instruments FULLTEST3 - Manual (Page 4)

FULLTEST 3
EN - 3
1. SAFETY PRECAUTIONS AND PROCEDURES
CAUTION
For your own safety and to avoid damaging the instrument follow the procedures
described in this instruction manual and read carefully all notes marked with this symbol.
This instrument complies with safety Standards EN61557 and EN61010-1 related to electronic
measuring instruments. When taking measurements:

Avoid doing this in humid or wet places - make sure that humidity is within the limits indicated in
section “Environmental conditions”.
 Avoid doing this in rooms where explosive gas, combustible gas, steam or excessive dust is
present.
 Keep you insulated from and do not touch the object under test, any exposed metal part such as
test lead ends, sockets, fixing objects, circuits etc.
 Avoid doing this if you notice anomalous conditions such as breakages, deformations, fractures,
blind display etc.
The following symbols are used in this instruction manual:
Warning of a potential danger, comply with instruction manual.
☞
Reference, please pay utmost attention.
UUT Unit under test
Caution, dangerous voltage. Danger of electrical shock.
Symbol for marking of electrical and electronic equipment (WEEE Directive).
Conformity symbol, the instrument complies with the valid directives. It complies with the
EMC Directive and the Low Voltage Directive.