GW Instek GOM-802 User Manual - Manual (Page 19)

GOM-802 DC MILLI-OHM METER
USER MANUAL
⎯ ⎯
32
1) Make sure the power cord is unplugged.
2) Adjust the line voltage selector switch to the desired line voltage
position.
3) A change in line voltage may also require a corresponding change
of fuse value. Install the correct fuse value as listed on rear panel.
8-3. Cleaning
To keep the instrument clean, wipe the case with a damp cloth and
detergent. Do not use abrasives or solvents.