Edwards Signaling 5530M-485 - Manual (Page 3)

P/N 3100345 ISSUE 2 PAGE 3
CAUTION CAUTION CAUTION CAUTION CAUTION
Ensure that power is disconnected before cleaning inside of
unit.
Maintenance and Maintenance and Maintenance and Maintenance and Maintenance and T T T T Test est est est est
Examine the unit semi-annually for accumulation of dirt.
Clean if necessary.
Protocol Protocol Protocol Protocol Protocol
1.0 Setting Unit Address and Network Baud Rate
1.1 Locate the 8-position dip switch, S1, on the top edge of the RS485 COMM board (Figure 6).
1.2 Unit address range is 00-1F hex. (00-31 decimal). Refer to Table 2.2 for unit address configuration. Set S1
positions 1-5 for the desired unit address configuration.
Table 2.2 Unit Address Switch Configuration
Unit Address S1-1 S1-2 S1-3 S1-4 S1-5
Hex Decimal
00 00 OPEN OPEN OPEN OPEN OPEN
01 01 CLOSED OPEN OPEN OPEN OPEN
02 02 OPEN CLOSED OPEN OPEN OPEN
03 03 CLOSED CLOSED OPEN OPEN OPEN
04 04 OPEN OPEN CLOSED OPEN OPEN
05 05 CLOSED OPEN CLOSED OPEN OPEN
06 06 OPEN CLOSED CLOSED OPEN OPEN
07 07 CLOSED CLOSED CLOSED OPEN OPEN
08 08 OPEN OPEN OPEN CLOSED OPEN
09 09 CLOSED OPEN OPEN CLOSED OPEN
0A 10 OPEN CLOSED OPEN CLOSED OPEN
0B 11 CLOSED CLOSED OPEN CLOSED OPEN
0C 12 OPEN OPEN CLOSED CLOSED OPEN
0D 13 CLOSED OPEN CLOSED CLOSED OPEN
0E 14 OPEN CLOSED CLOSED CLOSED OPEN
0F 15 CLOSED CLOSED CLOSED CLOSED OPEN
10 16 OPEN OPEN OPEN OPEN CLOSED
11 17 CLOSED OPEN OPEN OPEN CLOSED
12 18 OPEN CLOSED OPEN OPEN CLOSED
13 19 CLOSED CLOSED OPEN OPEN CLOSED
14 20 OPEN OPEN CLOSED OPEN CLOSED
15 21 CLOSED OPEN CLOSED OPEN CLOSED
16 22 OPEN CLOSED CLOSED OPEN CLOSED
17 23 CLOSED CLOSED CLOSED OPEN CLOSED
18 24 OPEN OPEN OPEN CLOSED CLOSED
19 25 CLOSED OPEN OPEN CLOSED CLOSED
1A 26 OPEN CLOSED OPEN CLOSED CLOSED
1B 27 CLOSED CLOSED OPEN CLOSED CLOSED
1C 28 OPEN OPEN CLOSED CLOSED CLOSED
1D 29 CLOSED OPEN CLOSED CLOSED CLOSED
1E 30 OPEN CLOSED CLOSED CLOSED CLOSED
1F 31 CLOSED CLOSED CLOSED CLOSED CLOSED
The Adaptatone should be tested annually or as required
by the authority having jurisdiction to ensure continuous
service.