Edwards Signaling 106DEXST-FJ - Manual (Page 3)

P/N 3100101 ISSUE 6
Table 3. 106DEX AdaptaBeacon Strobe Light Replacement Parts
Mounting Replacement
Cat. No. Method Strobe
106DEXPSTC-FJ Pendant Cat. No.
Figure 1 92-ST
106DEXCSTC-FJ Ceiling
Figure 2
106DEXBSTC-FJ Bracket
Figure 3
Table 1. 106DEX AdaptaBeacon Strobe Light Electrical Specifications
Operating Current* Initial Surge Inrush Current Repetitive Surge Current
Voltage** RMS Current (A) Mean Current (A) Current (A) Time (mS) Current (A) Time (mS)
20V DC 1.08 0.84 2.70 1.10 2.24 450
24V DC 0.95 0.69 2.97 1.13 2.21 400
28V DC 0.85 0.66 3.06 1.24 2.16 381
30V DC 0.83 0.64 3.14 1.27 2.14 360
*Use the operating current to establish the wire gauge and standby power requirements. Consult the control unit manufacturer to
determine surge and peak current effects and maximum number of strobes on the system.
**CAUTION: To prevent damage to the visual signal's internal circuit and to assure its continued proper functioning, DO
NOT operate the unit outside of the Special Application Voltage range of 20-30V DC.
Table 2. 106DEX AdaptaBeacon Strobe Light Specifications
Mounting Conduit Flash Rated Light
Cat. No. Method Size Rate Output
106DEXPSTC-FJ Pendant 3/4" 360° beam 55 cd/35 cd
Figure 1 NPT of light at per
106DEXCSTC-FJ Ceiling ~65 fpm Figure 5
Figure 2
106DEXBSTC-FJ Bracket
Figure 3
Table 4. Supply Wire Temperature Markings
Ambient Supply Wire
Temperature Temperature Marking
40°C 75°C
55°C 90°C
65°C 105°C