Edwards Signaling 116DEGEX-FJ - Manual (Page 2)

Figure 5 on page 3. See Table 3 on page 5 for
required supply wire temperature ratings. Install
main housing to the ceiling mount module. Tighten
the setscrew to secure the 116 main housing to the
ceiling mount module.
c. Bracket Mount Models (Figure 3 below): Install
the ceiling mount module, Cat. No. 116EX-C, using
hardware (not supplied) that is suitable for the
mounting surface. Install the wall mount module,
Cat. No. 116EX-B, to the 116 main housing.
Tighten the setscrew to secure wall mounting
module to the main housing. Run the unit's wiring
through the elbow to the wall box. Connect field
earth ground wire to ground screw or earth ground
via conduit system. Wire the unit in accordance
with Figure 5 on page 3. See Table 3 on page 5
for required supply wire temperature ratings. Install
the main housing and 116EX-B wall mount module
to the ceiling mount module. Tighten the setscrew
to secure the 116EX-B wall mount module to the
ceiling mount module.
WARNING: To reduce the risk of ignition of hazardous
atmospheres and shock, keep assembly tightly closed when
circuits are energized.
2. Apply power to the unit and ensure proper function.
Figure 1: Detail of pendant mounting
Figure 2: Detail of ceiling mounting
Figure 3: Detail of wall bracket mounting
2 / 6 P/N 3101131 • REV 04.00 • ISS 24JUN11