beautypg.com

5 - m, Ection, Anagement – Triton 9621 Operation Manual User Manual

Page 109: Unctions

background image

5-67

S

ECTION

5 - M

ANAGEMENT

F

UNCTIONS

S

INGLE

-C

ASSETTE

C

ASH

D

ISPENSER

O

PERATION

M

ANUAL

T

RITON

S

YSTEMS

, I

NC

.

M

ODELS

9600/9601/9620/9621

F

UNCTION

: LOW CURRENCY

F

ACTORY

D

EFAULT

: ENABLED

A

CCESS

I

NSTRUCTIONS

:

1.) Select TERMINAL CONFIGURATION from the

MANAGEMENT FUNCTIONS menu.

2.) Select SET TERMINAL PARAMETERS.
3.) Select CASSETTE SETUP.
4.) Choose the LOW CURRENCY option.

D

ESCRIPTION

:

This function is used to enable or disable low currency checking on the dispenser mechanism. If
LOW CURRENCY CHECKING is ENABLED, the Cash Dispenser will go out of service (it will
display an ERROR 182) when the cash cassette gets down to approximately 60 notes. Enabling
LOW CURRENCY CHECKING will prevent the need for reversals because there will never be a
partial dispense.

If LOW CURRENCY CHECKING is DISABLED, the Cash Dispenser will not go out of service
until the cassette is completely empty. This may result in the need to reverse the last withdrawal
due to a partial dispense occurring. In the event of a partial dispense, or no dispense, the terminal
will automatically inform the Processor and the customers account will be correctly credited. The
record of the successful reversal will be recorded in the journal record.

E

RROR

C

ONDITIONS

:

When the cassette runs out of money during a dispense operation an Error Code 33 (feed failure)
will be displayed and the terminal will go out of service. If the error condition is reset with less
than about 1/2” to 3/4” of bills in the cassette an error code 182 will be displayed (even with LOW
CURRENCY CHECKING disabled). To avoid this the Cash Dispenser must be reset with the
cassette out of the dispenser, or more than 60 bills must be loaded into the cassette.

**NOTE**

If the cassette runs out of currency during a dispense, the terminal will generate another call to the
processor to reverse the amount not dispensed. Do not reset or turn off the terminal during this
call. Doing so will cause the reversal to fail and result in an out of balance condition.

This manual is related to the following products: