AMT Datasouth 6000 - Manual (Page 49)

48 User's Guide Fastmark 6000 Series
Interaction Commands
Such commands only apply to the serial port and allow the host to understand the status
and configuration of the printer.
Command Description Response
from printer Contents of the Response
# Reset Yes T
A Send a readable status
string Yes <8 bytes, Y/N>
byte 1 : Y - printer busy
byte 2 : Y - paper out
byte 3 : Y - ribbon out
byte 4 : N (always)
byte 5 : Y - printing
byte 6 : Y - printer paused
byte 7 : Y - label presented
byte 8 : N (always)
B Toggle pause
condition No
E Send the number of
labels to be printed Yes e. g.
0000
no label left to be printed
F Send status byte Yes n
Same as A, except bits 1 to 8
corresponds to bytes 1 to 8 of A.
Notes:
1. Control codes for the printer commands.
Symbol Code (hexadecimal)
XON 11H
XOFF 13H
STX 02H
SOH 01H
ESC 1BH
LF 0AH
CR 0DH
2. There is no space code in each command.