AMT Datasouth 6000 - Manual (Page 33)

32 User's Guide Fastmark 6000 Series
LED Indicators
There are three LED indicators on the front panel, “READY”, “MEDIA” and
“RIBBON”. These indicators display the present status of the printer.
X READY The Ready LED indicates the following conditions:
ON - The printer's powered is on.
Off - The printer's power is off.
Blinking - Error condition (see Troubleshooting section for
details)
X MEDIA The Media LED indicates the following conditions:
ON - Media is installed and ready for Normal
operation.
Off - The printer's power is off.
Blinking - Media Out condition.
This condition only occurs following a media
motion request.
X RIBBON The Ribbon LED indicates the following conditions:
ON - The printer is set for Thermal Transfer mode
and the printer contains a Thermal Transfer
Ribbon.
OFF - The printer is set for Direct Thermal Mode.
Blinking - The printer is set for Thermal Transfer mode
and the ribbon is not moving or at end of life.
This condition only occurs following a media
motion request.