AMT Datasouth 6000 - Manual (Page 35)

34 User's Guide Fastmark 6000 Series
Pressed during normal operation
Button Function
m FEED The printer will Feed a one label.
m PAUSE The printer will blink the READY LED and display PAUSE
on the LCD display while in the Paused condition.
If printing, the printer will STOP printing, and the READY
LED will blink.
If pressed a second time the printer will resume normal
operation.
m CANCEL The printer will Stop printing and delete any further
information in the printer's buffer. The user must realign the
media by pressing the FEED button, following this function.
The printer will blink the READY LED and display CANCEL
on the LCD display while in the Paused condition.
Pressed for Special functions
Both buttons must be pressed at the same time to access the special functions.
Button Function
m PAUSE
m CANCEL Enter into the printer's Setup menu.
See the Front Panel Setup Menu section for more
information.
m PAUSE
m CANCEL If held down for more than 5 seconds, the printer will allow
Language Selection.
See the Setting the Display Language section for more
information.