LumaSense Technologies Pearl Control - Manual (Page 23)

Pearl Control Software Manual Using Calibrate Tab Features 23
4 Using Calibrate Tab Features
Note: The Calibrate Tab should only be unlocked by trained technicians.
4.1 Accessing the Calibrate Tab
A password is required to unlock and access the Calibrate Tab and Reset Camera feature.
To access the Calibrate Tab:
1. Click Help on the Menu Bar.
2. Select Advanced.
3. Type in the following password: engineer
Note: The password is case-sensitive.
4. Click OK or press enter.
5. The Calibrate Tab will appear below the Capture Tab in the Action Bar.