LumaSense Technologies IS 8-GS pro User Manual
Page 10
Series 8 pro Manual
Introduction 10
Parameters:
Emissivity, direct emissivity setting; storage interval,
temperature indication in °C or °F, reading temperature values
Objective:
Achromatic, optics adjustable from a = 500 mm to ,
with close-up lens (optional) a = 250 mm to 500 mm
Effective lens aperture diameter D: 20 mm (distance ) to
25 mm (distance 500 mm)
Sighting (ocular):
Optimized thru-lens view finder with diopter correction
-2.5 ... +3 dpt,
view magnification: 3 x, angle of view 10° indication circle for
measuring spot
Instrument settings:
side keypad
Data storage:
4000 values, storage of: measurement value, date, time,
parameters, emissivity, temperature unit
Storage interval:
Off; 0.001 s; 0.02 s; 0.1 s; 1 s; 10 s; 100 s; 500 s
Displays:
instrument’s back side: LED, 4 digit, 7 segment, 10 mm high,
additional built-in LED display in the view finder
left side: LC display, 128 x 64 pixel, illuminated.
3 values / s; last value is displayed for another 15 s after
finishing measurement (HOLD function), display when
exceeding the max. temp range: 20 °C above end of temp.
range, display when falling below the min. temp. range: 5 °C
below beginning of temp. range
Serial interface:
USB 2.0 (supplies the instrument when connected,
but without battery charging function)
Ambient temperature:
0 to 50 °C
Storage temperature:
-10 to 65 °C
Power supply:
6 x 1.5 V alkaline-manganese batteries (AA) or
6 x 1.2 V rechargeable batteries (AA)
Battery operation time:
approx. 35 hours with one battery set
Tripod socket:
3/8"
Housing:
Aluminum, handle polyamide
Weight:
1.2 kg with batteries
Protection class:
IP52 (housing, except push button at the handle)
IP40 (handle)
Dimensions:
210 x 75 x 175 mm (L x W x H)
CE-label:
according to EU directives about electromagnetic immunity
Note: The calibration / adjustment of the instruments was carried out in accordance
with VDI/VDE directive “Temperature measurement in industry, Radiation
thermometry, Calibration of radiation thermometers”, VDI/VDE 3511, Part 4.4.
For additional details on this directive, see http://info.lumasenseinc.com/calibration or
order the directive from “Beuth Verlag GmbH” in D-10772 Berlin, Germany.