Brocade EZSwitchSetup Administrator’s Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) - Manual (Page 42)

1. Type your user name and password.
2. Click OK.
A Switch Manager session is established, and the Switch View is displayed.
Switch Manager sessions
A session is defined as the connection between the Switch Manager client and its managed switch. A
session is established when you log in to a switch through EZSwitchSetup. A session remains in effect
until you log out or the session times out due to inactivity.
Logging out
You can end your Switch Manager session either by selecting Log Out under Miscellaneous in the
Tasks panel, or by closing the browser window. All windows belonging to the session are invalidated
(after a short delay they appear dimmed and unavailable, but you must close them manually), and the
session is terminated.
Viewing switch information
Using EZSwitchSetup Switch Manager, you can view the following:
• Switch status, including port status
• Temperature, fan, and power supply status
• HBA and storage connections to the switch
• Information about devices connected to the switch
• Accessibility between HBAs and storage
To view the switch information, perform the following steps.
1. Click View in the Tasks panel under Switch.
2. Click the Switch Information tab to display the Switch View.
Switch Manager sessions
40 EZSwitchSetup Administrator’s Guide
53-1003129-01