Brocade NetIron CER 2000 Series Hardware Guide (Supporting R05.6.00) - Manual (Page 75)

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 65
53-1003029-02
Power cords
5
FIGURE 46 Console port pin assignments showing cable connection options to a terminal or PC
Management port pin assignments
The management port is an RJ-45 UTP connector. Table 18 describes the connector’s pin
assignments.
Power cords
The types of power cords provided with the Brocade are specific to the country where they are
installed. To order a power cord, contact your Brocade supplier.
TABLE 18 Management port pin assignments
Pin number MDI-X ports
1 TD+
2 TD-
3 RD+
4 Not used (10BaseT)
CMT (100BaseTX)
5 Not used (10BaseT)
CMT (100BaseTX)
6 RD-
7 Not used (10BaseT)
CMT (100BaseTX)
8 Not used (10BaseT)
CMT (100BaseTX)