Brocade NetIron CER 2000 Series Hardware Guide (Supporting R05.6.00) - Manual (Page 73)

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 63
53-1003029-02
Port specifications
5
• Total air flow: 267 LFM
• Fan operating noise:
• Based on ISO 7779
• < 60 dB-A
Safety agency approvals
• CAN/CSA-22.2 No.60950-1-07/UL 60950-1-Second Edition
• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and
User’s Guide
• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications
Systems
• CE EN60950-1: 2006
• TUV EN60950-1: 2006
• IEC EN60950-1:2005
Electromagnetic approvals
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• CISPR-22 (class A)
• ICES-003 (Canada) (Class A)
• AS/NZ 55022 (Australia) (Class A)
• VCCI (Japan) (Class A)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-3
Port specifications
This section provides pin assignments for the following ports:
• Device’s console port (serial connector)
• Device’s management port (RJ-45 unshielded twisted pair (UTP) connector)
DANGER
The intra-building ports of the equipment or subassembly is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its
wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4