Yokogawa PC-Based MX100 - Manual (Page 7)

IM MX100-0E
Standard Accessories
The following standard accessories are supplied with the main module. Check that all
contents are present and that they are undamaged.
*1 Not included when screw terminals are specified for the power section (Suffix code: W).
UL/CSA Standard
A1074WD
VDE Standard
A1009WD
BS Standard
A1054WD
AS Standard
A1024WD
D F Q R
Power Cord (one of the following power cords
is supplied according to the instrument’s suffix codes) *1
H
GB Standard
(complies with CCC)
A1064WD
MX100 Standard Software
Model: MX180
• MX100 Data Acquisition Unit Operation Guide (This manual) (IM MX100-02E)
• Precautions on the Use of the MX100/MW100 (IM MX100-71E)
• MX100/MW100 Data Acquisition Unit Installation and Connection Guide (IM MX100-72E)
• Control of pollution caused by MX100/MW100 products (IM MX100-91C)
MX100 Manual CD-ROM*2
Part number: B8722XH
Paper Manuals
*2 • MX100 Data Acquisition Unit User’s Manual
(IM MX100-01E)
• MX100 Data Acquisition Unit Operation Guide
(This manual) (IM MX100-02E)
• Contains the MX100 Standard Software
User’s Manual (IM MX180-01E).
Optional Accessories (Sold Separately)
Terminals
No. Name Model Min. Q’ty Note
1 10-CH screw terminal block
(with RJC)
772061 1 Dedicated to the MX110-UNV-M10/
MX115-D05-H10/MX115-D24-H10
2 Connection cable between
the input module and screw
terminal block
772062-050 1 Cable length: 50 cm *1
3 Connection cable between
the input module and screw
terminal block
772062-100 1 Cable length: 100 cm *1
4 Plate with clamp terminals
(with RJC)
772063 1 Dedicated to the MX110-UNV-M10/
MX115-D05-H10/MX115-D24-H10
5 Clamp terminal 772064 1 Dedicated to the MX110-UNV-H04
6 Clamp terminal 772065 1 Dedicated to the MX120-VAO-M08/
MX120-PWM-M08/MX125-MKC-M10
7 Connector cover 772066 1 For empty slots with no module
installed
8 Plate with clamp terminals 772067 1 Dedicated to the MX110-V4R-M06
9 Plate with clamp terminals
(Built in bridge: 120 Ω)
772068 1 Dedicated to the MX112-B12-M04 *2
10 Plate with clamp terminals
(Built in bridge: 350 Ω)
772069 1 Dedicated to the MX112-B35-M04 *2
11 Plate with screw terminals
(M3 screw, with RJC)
772080 1 Dedicated to the MX110-UNV-M10,
MX115-D05-H10, and MX115-D24-H10
12 Plate with clamp terminals
for current (Built in shunt
resistor 10 Ω)
772081 1 Dedicated to the MX110-UNV-M10
13 Plate with clamp terminals
for current (Built in shunt
resistor 100 Ω)
772082 1 Dedicated to the MX110-UNV-M10
14 Plate with clamp terminals
for current (Built in shunt
resistor 250 Ω)
772083 1 Dedicated to the MX110-UNV-M10
*1 772062 is only applicable between the MX110-UNV-M10 and the screw terminal block
(772061), the MX115-D05-H10 and the screw terminal block (772061), and the MX115-
D24-H10 and the screw terminal block (772061).
*2 772068 is only applicable to MX112-B35-M04. 772069 is only applicable to MX112-B12-M04.
Checking the Contents of the Package