Yokogawa PC-Based MX100 - Manual (Page 50)

50
IM MX100-0E
Operations of the MX100 Standard Software
Changing the Display Using the Display Setup Window
See the explanation in the figure below. Change the display settings and click OK.
Set the display for each display group. The settings are similar to the Display screen on
the Integration Monitor.
Select the display
format of Y-axis
Switch the display group
Select the channels (displays the channel selection dialog box)
Group name Display ON/OFF
Select the Y-axis type (linear/logarithmic)
Turn Y-axis ON/OFF when displaying multi-axes zone
Maximum/Minimum value of the scale
Turn ON/OFF the trip point display
Trip point value
Channel display color
Display zone position
Numeric Display
You can also show the numeric display window (see the figure below). With the
waveform display window open, click the
button on the toolbar or choose Sheet from
the Window menu. When groups with different monitor intervals are present, the screen
is divided accordingly.
Date/
Time of measurement/computation
Switch the display group
Alarm
Channel display color
Measured value or
computed value
Data number
Active channel (Y-axis display
channel on the waveform display)
Mark display Scroll measured/computed values
Display per record interval