Yokogawa PC-Based MX100 - Manual (Page 48)

4
IM MX100-0E
Displaying Recorded Measured Data, Reading Values Using Cursors, and
Statistical Computation over an Area
You can display measured or computed data that has been recorded.
1. Choose Programs > MX100 Standard > MX100 Viewer to start the Viewer. You can
also choose Launch Historical Viewer from the File menu or click the button on
the Integration Monitor.
2. From the File menu, choose Open.
You can also click the button on the toolbar.
The Open dialog box opens.
File information
Select the folder specified
as the save destination
of record files described
on page 30
3. Select the file you wish to load and click Open.
The waveform display window opens.
When a file recorded using the Integration Monitor is opened, a dialog box for
confirming whether to carry out synchronization (see the note below) opens. Click
Yes or No.
Waveform display
window
Note
The data recorded using the Integration Monitor has time stamps attached by the MX100 (see
section 1.2, “Main Module Functions” in the MX100 Data Acquisition Unit User’s Manual (IM
MX100-01E)). When synchronization is carried out, the time is corrected to the time on the PC,
and the data is saved using the corrected time. The name of the created file remains the same
but with a different extension .mxs. The file with .mxd extension before synchronization is not
deleted.
Operations of the MX100 Standard Software