Yokogawa PC-Based MX100 - Manual (Page 46)

46
IM MX100-0E
Setting the Computation
You can enter computing equations using operators, constants, and functions. The
computed results be displayed and recorded (saved). Computation allows you to
determine the average/maximum/minimum of a specified channel on a specified date/
time or output events (start/stop record, reset time, etc.) under specified conditions. For
details on computations including available operators, constants, and functions, see the
MX100 Standard Software User’s Manual (IM MX180-01E).
Set computations using
Math Channel on the Channel setup screen in the figure below.
Set the monitor interval and record interval for computed data on the Acquisition setup
screen.
Enter the
constant value
Enter the label for
identifying the constant
Check here to calculate +Over and
–Over as maximum and minimum
values of the measurement range
Enabled when rHigh
or rLow is selected
for the type
Settings when using the timer in the computation
Enter the tag comment (up to 30 characters)
Enter the tag number (up to 15 characters)
Enter the unit for computed values
(up to 6 characters)
Enter the equation
Select to monitor, or clear to not monitor
Computation channel numbers
Select to record, or clear to not record
(saving of computed data)
Click Math channel tab
Saving/Loading and Printing of Setup Data (Project)
Saving Setup Data (Project)
From the File menu, choose Save or Save As to save the setup data. The default save
destination is the folder depends on the system that is running. The extension is .mxp.
The default file name is NewProject.mxp.
or
Operations of the MX100 Standard Software