Yokogawa Button Operated MV2000 - Manual (Page 7)

WARNING
• Use the Correct Power Supply
Ensure that the source voltage matches the voltage of the power supply before turning the power ON.
• Use the Correct Power Cord and Plug
To prevent electric shock or fire, be sure to use the power cord supplied by YOKOGAWA. The main
power plug must be plugged into an outlet with a protective earth terminal. Do not disable this protection
by using an extension cord without protective earth grounding.
The power cord and the power cord for the AC adapter are designed for use with this instrument. Do not
use them with other instruments.
• Connect the Protective Grounding Terminal
Make sure to connect the protective grounding before turning the power ON, to prevent electric shock.
The power cord that comes with the desktop type is a three-pronged power cord. Connect the power
cord to a properly grounded three-prong outlet.
• Do Not Impair the Protective Grounding
Never cut off the internal or external protective grounding wire or disconnect the wiring of the protective
grounding terminal. Doing so invalidates the protective functions of the instrument and poses a potential
shock hazard.
• Do Not Operate with Defective Protective Grounding
Do not operate the instrument if the protective grounding might be defective. Make sure to check it
before operation.
• Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable liquids or vapors. Operation in such an
environment constitutes a safety hazard.
Prolonged use in a highly dense corrosive gas (H
2
S, SOx, etc.) will cause a malfunction.
• Do Not Remove Covers
The cover should be removed by YOKOGAWA’s qualified personnel only. Opening the cover is
dangerous, because some areas inside the instrument have high voltages.
• Ground the Instrument before Making External Connections
Connect the protective grounding before connecting to the item under measurement or the control unit.
• Damage to Safety Features
Operating the instrument in a manner not described in this manual may damage the instrument’s safety
features.
CAUTION
This is a class A instrument. Operation of this equipment in a residential area can cause radio
interference, in which case users will be required to correct the interference.
• Exemption from Responsibility
• YOKOGAWA makes no warranties regarding the product except those stated in the WARRANTY that is
provided separately.
• YOKOGAWA assumes no liability to any party for any loss or damage, direct or indirect, caused by the
user or any unpredictable defect of the product.
IM MV2000-02E