Yokogawa Button Operated MV2000 - Manual (Page 30)

Quick Settings
Using the quick settings function, you can switch quickly to the measurement channel
(measurement range and alarm) and data save configuration screens by pressing
T/DIV.
Procedure
Operate the MV from the Quick settings screen according to the procedure described below.
• Measurement channels:
Set channels 1 through 4 to the following settings:
Mode: Volt, Range: 2V, Span_L: -2V, Span_U: 2V
• Display-data save settings: Trend/Storage interval: 1min, Save interval: 1h
• Event data save settings: Sample rate: 1s, Mode: Free (mem. sampling started with
START/STOP key), Data length: 1h
For default MV2000 settings, see page 36.
Press MENU.
Press the left arrow key.
Press T/DIV.
Set the measurement range.
1. Select the channel to configure.
Press 1 for the first channel and 4 for the last channel.
2. Select the Mode.
Press the Volt soft key.
3. Select the Range.
Press the 2V soft key.
4. Enter the Span Upper and Span Lower limits.
Press the Input soft key, and select a value
with the character/number input keys and the up
and down arrow keys .
30
IM MV2000-02E