Yokogawa Removable Chassis DX1000N - Manual (Page 34)

3-13
IM 04L41B01-03E
Operations
1
2
3
Index
3.6 Writing Messages
This procedure shows how to write messages for batch groups.
Setup Screen
• How to Write Messages
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > View, Message.
• Message Settings
For details on the message settings, see section 5.4 in the User’s Manual.
• Writing a Message When the DX Recovers from a Power Failure
For details on writing a message when the DX recovers from a power failure, see
section 5.16 in the DX1000/DX1000N User’s Manual or section 5.17 in the DX2000
User’s Manual.
Setup Items
• Message > Write group
This setting applies only for messages that are written using keys.
Setting Description
Common Write the message to all the display groups for the batch group currently
displayed.
Separate Write the message only to the visible display group for the batch group
currently displayed.
• Message > Power-fail message
Setting Description
On Automatically writes the message when the DX recovers from a power failure.
The message is written to all batch groups that are recording.
Example message: 15:12 Power Off 2005/10/25 15:12:57
Off Disables the feature.
• Message > Change message
Setting Description
On On DXs with the /AS1 advanced security option, a message is written when
the setting mode setup items are changed during memory sampling. On DXs
without the /AS1 advanced security option, this setting is invalid.
Item Message
Alarm setting change AlarmSet
Alarm delay time change AlmDlaySet
Calibration change Calibration correction Setting
Off Disables the feature.