Yokogawa Removable Chassis DX1000N - Manual (Page 20)

2-5
IM 04L41B01-03E
Settings
1
2
3
Index
• Trip line > 1, 2, 3, 4
Select On for the trip lines that you want to display.
• Trip line > Position
Set the position in the range of 0 to 100% of the display width.
• Trip line > Color
The default colors are red, green, blue, and yellow. If want to change a color, you can
select from 24 available colors.
• Trip line > Width
Set the line width of the trip line in dots (1 to 3).
• File header > Characters
Enter a header comment to write into data files. The file header is displayed on the
batch overview screen’s batch identification bars, the status display section for batch
single mode (only for the DX2000), and the title bar for the start and stop recording
screens. (Up to 50 characters,
A a # 1 )
• Data file name > Structure
Sets the structure of the file name when saving data.
Setting Description
Date Sequence number + user-assigned character string + date
Serial Sequence number + user-assigned character string
Batch Sequence number + batch name
• Data file name > Identified strings
Set the user-assigned character string. (Up to 16 characters, A a # 1 )
You can use these symbols: # % ( ) + – . @ ° _
For an explanation of data file names, see section 1.1.
• Text field number
Select the text field number from 1 to 24.
• Text field > Title of field, and Text field > Characters
Enter a character string.
Title of field: you can enter up to 20 characters for the field title.
A a # 1
Characters: you can enter up to 30 characters for the field information. A a # 1
2.2 Setting the Multi Batch Function