Yokogawa Removable Chassis DX1000N - Manual (Page 24)

3-3
IM 04L41B01-03E
Operations
1
2
3
Index
• Starting Recording from Batch Single Mode
Follow the procedure below when the batch single mode screen is displayed.
1. Press START.
The start recording screen appears.
* On DXs with the /AS1 advanced security option, recording will not start, even if you press
START in setting mode.
2. Confirm or change the batch number (Batch name-No.) and lot number, and enter
comments for the batch.
To edit the contents of a text field, proceed to step 3.
3. Select Input, and press DISP/ENTER. The text field screen of the specified batch
group appears (release numbers 4 and later).
The settings that you made
in setting mode appear here.
Select a text field number, enter text, and press DISP/ENTER .
The start recording screen will appear.
The text fields that you specify here will only be saved to the measured data file whose
recording you are starting. The text fields that you set in setting mode (see page 6-6) will not
change.
4. Move the cursor (blue) to START, and press DISP/ENTER.
Recording starts for the selected batch group. The internal memory icon in the status display
section changes from the icon that indicates that memory sampling is stopped to the icon
that indicates that memory sampling has started.
For details on starting reports and computations, see section 1.1.
3.1 Starting/Stopping Recording, and Saving Data