Yokogawa Removable Chassis DX1000N - Manual (Page 23)

3-2
IM 04L41B01-03E
4. Select Input, and press DISP/ENTER. The text field screen of the specified batch
group appears (release numbers 4 and later).
The settings that you made
in setting mode appear here.
Select a text field number, enter text, and press DISP/ENTER.
The start recording screen will appear.
The text fields that you specify here will only be saved to the measured data file
whose recording you are starting. The text fields that you set in setting mode (see
page 6-6) will not change.
5. Move the cursor (blue) to START, and press DISP/ENTER.
Recording starts for the selected batch group. The internal memory icon in the status display
section changes from the icon that indicates that memory sampling is stopped to the icon
that indicates that memory sampling has started.
For details on starting reports and computations, see section 1.1.
When You Select All
3. Select Yes, and press DISP/ENTER.
The DX starts recording.
For details on starting reports and computations, see section 1.1.
3.1 Starting/Stopping Recording, and Saving Data