Yokogawa Removable Chassis DX1000N - Manual (Page 2)

i
IM 04L41B01-03E
Thank you for purchasing the Daqstation DX1000, DX1000N, or DX2000 (hereafter
referred to as the DX).
This manual describes the operating procedure for the DX Multi Batch function (/BT2
option). Please use this manual in conjunction with the DX1000/DX1000N User’s Manual
(IM04L41B01-01E) or the DX2000 User’s Manual (IM04L42B01-01E).
Notes
• The contents of this manual are subject to change without prior notice as a result of
continuing improvements to the instrument’s performance and functions.
• Every effort has been made in the preparation of this manual to ensure the accuracy
of its contents. However, should you have any questions or find any errors, please
contact your nearest YOKOGAWA dealer.
• Copying or reproducing all or any part of the contents of this manual without the
permission of YOKOGAWA is strictly prohibited.
• The TCP/IP software of this product and the documents concerning it have been
developed/created by YOKOGAWA based on the BSD Networking Software, Release
1 that has been licensed from the Regents of the University of California.
Trademarks
• vigilantplant, DAQSTATION, Daqstation, and DXAdvanced are registered trademarks
of Yokogawa Electric Corporation.
• Microsoft and Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems
Incorporated.
• Kerberos is a trademark of the Massachusetts Institute of Technology (MIT).
• Company and product names that appear in this manual are registered trademarks or
trademarks of their respective holders.
• The company and product names used in this manual are not accompanied by the
registered trademark or trademark symbols (® and ™).
Revisions
1st Edition: November 2008
2nd Edition: March 2010
2nd Edition: March 2010 (YK)
All Rights Reserved, Copyright ©2008, Yokogawa Electric Corporation