Watlow SpecView from Watlow - Manual (Page 22)

SpecView from Watlow  22  Watlow Addendum
15) To save the GDW:
• From the File menu,
choose Save As.
• Enter a File name for
the GDW.
• Click Save.
Manually Set up or Modify a Modbus RTU, 485 or 232
Network
The following procedures guide you through the process of manually creating a configuration for a
Modbus RTU, 485 or 232 network and adding devices to this configuration. Use this procedure when
the controllers are not available to detect automatically, when you want to add a new controller to an
existing configuration and for creating configurations that communicate with EZ-ZONE controllers via
Modbus RTU.
To create a manual configuration:
1) Launch SpecView.
2) Click through any
informational dialogs
until you get to the
Configurations
Found dialog.
3) Click New Manual
Configuration.