Watlow SpecView from Watlow - Manual (Page 25)

SpecView from Watlow  25  Watlow Addendum
11) The first time you add an
instrument on a port,
SpecView opens the Port
Settings Dialog. When
this happens:
• Set the Baud Rate for
the Port (for Standard
Bus no change is
needed).
• Click OK.
12) Repeat from step 4 for
each instrument to be
added.
13) Click Show Defined.
14) To add instrument views
to the GDW, for each:
• In the Variables list
select the instrument.
• Click Add Item.
15) To save the GDW:
• From the File menu,
choose Save As.
• Enter a File name for
the GDW.
• Click Save.
Note: This procedure configures SpecView to display parameters such as set point and process variable
as whole numbers when communicating by Modbus. See Adjust the Displayed Decimals on page 31 to
use another decimal setting.