Watlow SpecView from Watlow - Manual (Page 21)

SpecView from Watlow  21  Watlow Addendum
7) In the Add/Rename
Instrument dialog
type a Name for the
instrument.
8) Select the Port.
9) Enter the Address in
the form from the
table above where z is
the address or zone
number set in the
controller.
10) Click Create.
11) The first time you add
an instrument on a
port, SpecView opens
the Port Settings
Dialog. When this
happens: Click OK
(for Standard Bus no
change is needed).
12) Repeat from step 4 for
each instrument to be
added.
13) Click Show Defined.
14) To add instrument views
to the GDW, for each:
• In the Variables list
select the instrument.
• Click Add Item.