Jog the spit, View probe temperature, View actual oven temperature – Watlow MINICHEF 2000 Rotisserie Oven Application User Manual
Page 25: Adjust a menu while cooking, Pause a menu, Cancel a menu, Change menus or restart

A p p l i c a t i o n 2 8
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
2 3
Jog the Spit
When the menu is paused, the unit is in idle or the oven door is open, you can jog the
spit by pressing the Jog & Increment key. Event Output 1 is on while key is pressed.
ç
WARNING: The Jog and Increment keys cause or initiate machine motion. Appropriate reasonable care should be
taken to prevent personal injury or machine damage as a result of operator initiated or unexpected machine motion.
View Probe Temperature
When the [probe] parameter in the [etype] function of the Configuration mode is set
to [``yes] you can view the actual probe temperature.
•
Insert the probe into the food and press the Probe & Decrement key. While the
probe is heating, [wait] will appear on the display. When the probe reaches the
food temperature, the temperature reading will appear.
View Actual Oven Temperature
While cooking you can view the actual oven temperature by pressing and holding the
Temp key for three seconds.
Adjust a Menu While Cooking
You can adjust temperature and time settings during the cooking and hold sequences by
performing the actions shown under "Set a Manual Menu" earlier in this section.
Changes can be made to temperature and time only during the portion of the cooking
sequence in which they are active. For example: a change to the first cooking tempera-
ture [tENP1] can be made only when the first cooking temperature is being run during
the cooking sequence.
Time changes are not saved and do not become part of the permanent menu.
Temperature changes are saved and become part of the permanent menu.
Pause a Menu
While cooking, you can pause cooking time by pressing the Start/Stop key once. The
Start/Stop key indicator light will flash rapidly. [PAUSE] will appear on the display.
Countdown time will resume when you press the active menu key again.
Cancel a menu
Canceling a menu stops the controller completely. The controller does not maintain set
point temperatures or run time. Cancel a menu to run another menu, stop the menu
operation for any reason, or prepare to shut off the oven.
•
Press the Start/Stop key for 2 seconds (in Hold, momentarily press the Start/Stop
key). Heat outputs will switch off. Heat output indicator lights will switch off.
[`idLE] or time of day will be on the display.
Change Menus or Restart
With the controller in idle:
1.
Set a menu as shown earlier.
2.
Press the Start/Stop key.