Watlow MINICHEF 2000 Rotisserie Oven Application - Manual (Page 22)

2 0 ■ Wa t l o w M I N I C H E F 2 0 0 0 A p p l i c a t i o n 2 8
The second cooking temperature has been set.
[`idle] will appear on the display.
Set the two cooking times.
1. Press the Time key [tiNE1] and then the first cooking time value will appear on
the display.
2. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-
play.
3. Press the Time key again.
The first cooking time has been set.
[tiNE2] and then the second cooking time value will appear on the display.
4. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-
play.
5. Press the Time key again.
The second cooking time has been set.
[`idle] will appear on the display.
The menu you have set becomes the current menu for controller operation.
Set the Hold Temperature.
1. Press the Hold Temp key [HTENP] and then the hold temperature value will appear
on the display.
2. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-
play.
3. Press the Hold Temp key again.
The hold temperature has been set.
[`idle] will appear on the display.
Five Second Timeout
When using the Up-arrow or Down-arrow keys to change a value, if you do not press
any key for 5 seconds, the controller will automatically be set to the last value on the
display and return to [`idle].
Preheat
If the [Ready] parameter under the [SEtUP] function in the Configuration Mode is set
to yes, the controller will detect temperatures and preheat to operating temperature
(above the relative set point minus the ready band) as required.
• Activate the menu by pressing the Start/Stop key.
• If the oven is not at operating temperature, it will preheat. Meanwhile:
A B
D E
C
F
G H
M INI C HEF 2000
[`idle]
Edit Accept
Back-Up Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D E
C
F
M INI C HEF 2000
[100f`]
Edit Accept
Back-Up Exit
B
D E
C
F
M INI C HEF 2000
[ready]
Edit Accept
Back-Up Exit
G H G H
A A
[pre-`] [`Heat]