Preheat, Run a menu (with preheat feature), Idle – Watlow MINICHEF 2000 Rotisserie Oven Application User Manual
Page 11: 100f, Ready, Pre-`] [`heat, I n i, H e f
A p p l i c a t i o n 2 7
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
9
any key for 5 seconds, the controller will automatically be set to the last value on the
display and return to [`idle].
Preheat
If the [Ready] parameter under the [SEtUP] function in the Configuration Mode is set
to yes, the controller will detect temperatures and preheat to operating temperature
(above the relative set point minus the ready band) as required.
•
Activate the menu by pressing the Start/Stop key.
•
If the oven is not at operating temperature, it will preheat. Meanwhile:
The word [pre-] [`Heat] will appear on the display for a few moments. The
Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will
be displayed until the operating temperature is reached.
The heat output indicator light - G, just below the display- will light up whenever
the controller is calling for heat.
When the oven is at operating temperature (above the relative set point minus the
ready band) ready will appear on the display and the Start/Stop key indicator light
will flash rapidly. You are now ready to cook with the active menu.
•
If the oven is at operating temperature, the display goes directly to [ready] with-
out indicating preheat or temperature.
Note: You can skip preheat and go directly to the cooking sequence by pressing the Start/Stop key a second time.
Run a Menu (with preheat feature)
This procedure describes how to run an active menu when the preheat feature is active
– that is, when the [ready] parameter in the [setUp] function of the Configuration
mode is set to [~`yes].
1.
Select or Set a menu as shown earlier.
2.
With [`idle] or time of day on the display, press the Start/Stop key.
If the preheat condition has not been met, the oven will preheat until [ready] appears
on the display.
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]