9 setup guide for the system monitor screen, 9 setup guide for the system monitor screen -34, Setup guide for the system monitor screen – Proface APL3000B - Node Box PC User Manual
Page 85: 34 3.9 setup guide for the system monitor screen
PS-3650A / PS-3651A Reference Manual
3-34
3.9
Setup Guide for the System Monitor Screen
You can check the status of the PS-A being monitored.
Click the tab of the item you want to check.
3.9.1
Voltage / Fan / Temperature / Backlight / Watchdog Timer
•
PS-A items you want to monitor with the RAS features and the notification method used when
errors/alerts occur are set from the System Monitor Property.
For the System Monitor Property settings, refer to the following.
•
The Temperature tab displays the same items as the Voltage tab.
•
The Backlight and Watchdog Timer tabs display [Status] only.
•
The FAN tab is not displayed on the PS-3651A.
Item
Operation
Name
Displays the monitoring item.
Status
Specifies the item to be monitored. The status of each monitoring item is
displayed.
[Pass]: Normal
[Error]: Abnormal
[Disable]: Not monitored
Buzzer Off
When [Buzzer] is selected for the error notification method, you can stop
the buzzer by clicking [Buzzer Off].
Reset
When an error is detected, clicking [Reset] recovers the System Monitor
from the “error” status.
•
After an error is resolved, make sure to reset. If reset is not performed, the error
history remains, which causes the error to be detected again even if it was
resolved.
For the procedure to recover from an error status, refer to the following section.
Minimize
Stores the System Monitor screen in the task tray.
SEE
3.8 Setup Guide for the System Monitor Property (page3-28)
SEE